EBD: Electronic Balancing Damper – Round w/ Position Indication

$0.01

Submittal Form
SKU: EBD Category: Tags: , ,

The Young Regulator EBD is an Electronic Balancing Damper actuated by a 12V DC motor. Dampers above a hard ceiling or in any inaccessible location can be controlled with the EBDP – Electronic Balancing Damper Positioner, which opens and closes the damper and provides a visual indication of the damper position with an LCD meter.
Downlaod Spec Sheet

Required Accessories


X1 Per Job Battery powered with display meter for position indication

$0.01

x1 per assembly 10’ -50’ sizes available up to 1000’ available by special order
$0.01

Termination Options

Description

The Young Regulator EBD is an Electronic Balancing Damper actuated by a 12V DC motor. Dampers above a hard ceiling or in any inaccessible location can be controlled with the EBDP – Electronic Balancing Damper Positioner, which opens and closes the damper and provides a visual indication of the damper position with an LCD meter.

The Positioner can be used to control any number of dampers at a worksite through a variety of receptacles that are offered. The Positioner is self contained and small enough to be carried in a pocket. A high capacity battery is featured for long life and is easily replaced in
the field when necessary.

The EBD is ideal in a number of applications:

  • Labs, where more precise balancing or control may
    be required
  • Schools, prisons, and mental health facilities, where
    access to controls is restricted
  • Atriums, where dampers are inaccessible and long
    cable runs are required
  • Any situation where seasonal changes require rebalancing
    of the HVAC system

An EBD, Electronic Balancing Damper that includes the 12V DC motor, an EBDC Cable up to 1,000’ in length, and a termination are required for a complete assembly. Field connection between 12V DC motor and termination is fast and simple with snap on connectors installed by the factory. One EBDP Positioner is required per job.

Standard Construction
Shell4″-9″-24 ga.
10″-16″-20 ga.
Galvanized Steel
Blade20 ga. Galvanized Steel
Shaft1/2″ Plated Steel
BushingOil Impregnated Bronze
Size Information
One end straight, one end crimped
Rolled stiffening beads
Diameter4″-16″
Shell Length8″
Actuator
Volts12V DC
Watts< 0.5
Amp< 20 mA.
Timing12 sec. 90° Rotation
Torque16 lbs.-in. (max)
Accessories
REQUIREDTERMINATION OPTIONS
EBDP-Positioner
One per Order Minimum
EBD 301 Concealed
Ceiling Termination
EBDC
– Plenum Rated Cable One Per Damper
EBD 302 Concealed Wall
Termination
EBD-Wall (1, 2, 4, 6, 12 Ports)
OTHER
Spare BatteriesRectangular Dampers, Model EBDR
Low Leak SealsTake Off EBD-5050
OPTIONS
Available without
position indication (DCD)

Resources

Additional information

Shell

10” – 16” 20 ga. Galvanized Steel, 4” – 9” 24 ga. Galvanized Steel

Blade

20 ga. Galvanized Steel

Shaft

½” Plated Steel

Bushing

Oil Impregnated Bronze

One end straight, one end crimped

Rolled stiffening beads

Diameter

4" – 16"

Shell Length

8"

Volts

Watts

Amp

Timing

Torque

LOL
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Start typing and press Enter to search