3092: Rectangular Electronic Pressure Relief Damper

Submittal Form
SKU: 3092 Electronic Categories: ,


The Young Regulator Model 3092 is a rectangular bypass damper.  It regulates system static pressure by diverting the excess airflow back around to the ceiling plenum or ducted return.

An increase in static pressure, caused by the closing of a zone damper  is sensed by the built-in static pressure sensor/controller through the probe.  The pressure set-point is field adjustable.  At the desired maximum static, the controller starts to modulate the damper open.  As the system static pressure drops to the target range the damper blade stalls until there is another change in pressure.

the 3092 is a stand alone system.  No zone control pane is required.

The 4092 features the rugged, brushless Belimo LMB motor.  It carrys a 5-year warranty.

Additional information


14 ga. Roll Formed Galvinized Steel


16 ga. Galvinized


1/2” Plated Steel


Oil Impregnated Bronze


Low-Leak Rubber Blade Seals & Stainless Steel Spring Jam

Mounting Plate

5” wide x Damper Height


8×8 to 48×48

Differential Pressure Setpoint Range

0.08 to 1.2 InWC

Operating Range

-40° to 190° F

Electrical Switch

Solid State Switching and Timing Circut Rated 1Amp
@ 24VAC

Compliance / Enclosure

ETL Recognized / NEMA13 / IP54


Brushless 24VAC Motor Power Open/Power Closed

Volts / Watts / VA

24VAC / 1.5W running(0.2 W holding) / 2VA


35 Seconds


45 in-lbs