2075: VAV Damper – Auto Changeover w/ Relay


Submittal Form
SKU: 2075 Automatic Changeover Category: Tags: , , , , ,


The 2075 round, modulating zone dampers  by Young Regulator combine the advantages of Variable Air volume (VAV) and simple damper installation to provide pressure dependent, thermostatically controlled, zone control with automatic changeover between heating and cooling.  There is no need for an expensive VAV box.

These modulating dampers are operated with a three-wire, 24VAC, stall type reversing motor.  They are controlled by with a single pole /double throw/ center off thermostat like the Young Model T-312. (order separately)  In a heat/cool system, the vary the volume of air into a zone to maintain room temperature.  they are used independent of a zone control panel to solve isolated over heating/cooling problems.

The automatic chageover relay consists of a duct sensor and relay board.  The sensor is factory installed on the damper, upstream of the blade.  Then is will keep the sensor in contact with the system air so it always knows the temperature in the duct.

if supply air temp is above 72degrees F, then the system knows it is Heating.  It only responds to calls for heat.  Conversely if it is below 72 degrees F, the system is in cooling mode and only responds to calls for cooling.

The 2075 features the Honeywell 7-Minute motor for smooth, whisper-quiet, airflow changes.

the 2075 is built on a heavy-duty spiral shell.  This gives the damper additional rigidity.


  • Stand Alone Zone Control
  • Replace expensive VAV boxes


No Image Available

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Start typing and press Enter to search